Dial-Up Networking

• Double click on the My Computer icon on the desktop
• Double click on Dial-Up Networking
• If Dial-Up Networking is not installed, install it from the Windows 98 CD or disks
• Click once on the WTP icon
• Click on File on the Menu bar
• Click on Properties
• Uncheck the "Use area code and Dialing Properties" box
• Click on the Configure button
• Set the maximum modem speed
  • If the modem is 14.4; set it to 19,200
  • If it is 28.8, 33.6, or 56; set it to 57,600
• Do not check "Only connect at this speed"
• Click OK
• Click on the Server Types tab
• Type of Dial-Up Server: "PPP: Internet, Windows NT Server, Windows 98"
• Check "Enable software compression"
• Check "TCP/IP"
• Make sure that all of the other boxes are unchecked
• Click on the TCP/IP Settings button
• Click on "Server assigned IP address"
• Click on "Server assigned name server addresses"
• Check "Use IP header compression"
• Click OK and close out of Dial-Up Networking

Modems

• Double click on Control Panel in My Computer
• Double click on Modems
• Click on the Properties button
• Set the maximum speed to the same setting that you did in Dial-Up Networking
• Click on the Connection tab
• Click on the Advanced button
• Modem init strings (if needed) will go in the "Extra settings" field
• With some modems you may need to uncheck "Use error control"
• Click OK and close out of Modems

Network Settings

• Double click on Control Panel in My Computer
• Double click on Network
• The three network components that need to be installed:
  • Client for Microsoft Networks
  • Dial-Up Adapter
  • TCP/IP
• Double click on Dial-Up Adapter
• Click on the Bindings tab
• Make sure that TCP/IP is present and checked
• Click OK to return to the Configuration window
• Double click on TCP/IP
• Click on "Obtain an IP address automatically"
• Click on the WINS Configuration tab
• Click on "Disable WINS Resolution"
• Click on the Gateway tab
• Make sure there are no Installed Gateways
• Click on the DNS Configuration tab
• Click on "Disable DNS"
• Click OK, click OK again.
• If any changes were made, you will need to restart the computer for the settings to take effect.
  

Changing Access Number

• Double click the My Computer icon on your desktop.
• Double click the Dial Up Networking icon.
• Click once on the OneEighty icon.
• Click File.
• Click Properties.
• Insert the new telephone number in the Telephone Number box.
• Click OK.
• Close the Dial Up Networking window.
• Close the My Computer window.
• Dial into OneEighty.